| 焦化厂门型吊改造 |
| |
| 引用本文： | 于文妍,范俊来. 焦化厂门型吊改造[J]. 机械工程师, 2006, 0(5): 55-56 |
| |
| 作者姓名： | 于文妍 范俊来 |
| |
| 作者单位： | 1. 内蒙古科技大学机械工程学院,内蒙古,包头,014010
2. 包头钢铁集团设计研究院,内蒙古,包头,014010 |
| |
| 摘 要： | 从门型吊承轨梁的受力分析入手．研究剖析了原结构产生裂纹的诸多原因．通过理论计算。做出了承轨梁与桁架连接接点的最佳设计．提出了符合现场实际情况的更换承轨梁的最佳方案，为类似设备改造提供了可借鉴的经验。
|
| 关 键 词： | 门型吊 承轨梁 改造 |
| 文章编号： | 1002-2333(2006)05-0055-02 |
| 收稿时间： | 2005-12-07 |
| 修稿时间： | 2005-12-07 |
Transformation of the Door-shaped Hanger in the Coking & Chemical Factory |
| |
| YU Wen-yan,FAN Jun-lai. Transformation of the Door-shaped Hanger in the Coking & Chemical Factory[J]. Mechanical Engineer, 2006, 0(5): 55-56 |
| |
| Authors: | YU Wen-yan FAN Jun-lai |
| |
| Abstract: | This paper begins with an analysis of the beraing force of the door-shaped hanger and the trajectory eourese,and then makes a detailed study of the different causes for the crevices in them.To help solve the problem,the paper performs a theoretical calculation and gives the best design of the connection between the bearing trajectory course and the trussing structure to replace the original courese more practically .The paper offers experience as a reference for other similar equipments . |
| |
| Keywords: | door-shaped hanger bearing trajectory coures transformation |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
