| 氯化钠熔浸钾长石提钾过程 |
| |
| 引用本文： | 彭清静,邹晓勇,黄诚. 氯化钠熔浸钾长石提钾过程[J]. 过程工程学报, 2002, 2(2): 146-150 |
| |
| 作者姓名： | 彭清静 邹晓勇 黄诚 |
| |
| 作者单位： | 吉首大学化工研究所,湖南,吉首,416000 |
| |
| 摘 要： | 对熔融氯化钠浸取钾长石的提钾过程进行了研究. 结果显示，最佳反应条件是：反应温度890~950℃；氯化钠与钾长石的质量配比为1；钾长石的粒径为0.208 mm以下. 动力学分析显示，过程由Na+和K+在钾长石内部的离子扩散控制，扩散系数与反应温度之间的关系服从Arrhenius公式，即Deff=D0exp(–Ea/RT)，其中，Ea=81.42 kJ/mol，D0=0.324 mm2/h.
|
| 关 键 词： | 钾长石；提钾；氯化钠；动力学；熔盐浸取 |
| 文章编号： | 1009-606X(2002)02-0146-05 |
| 修稿时间： | 2001-06-11 |
Extraction of Potassium from Potash Feldspar Ores with Sodium Chloride |
| |
| PENG Qing-jing,ZOU Xiao-yong,HUANG Cheng. Extraction of Potassium from Potash Feldspar Ores with Sodium Chloride[J]. Chinese Journal of Process Engineering, 2002, 2(2): 146-150 |
| |
| Authors: | PENG Qing-jing ZOU Xiao-yong HUANG Cheng |
| |
| Abstract: | The main factors that affect the leaching rate of potassium in potash feldspar were studied. It is shown that the best reaction conditions are reaction temperature of 890~950oC, size of potash feldspar ores below 0.208 mm, and the weight ratio of sodium chloride to potash feldspar ores being 1. The study showed that the leaching process is controlled by the internal ionic diffusion of Na+ and K+ in potash feldspar. The relations between diffusion coefficient and reaction temperature is expressed by the Arrhenius formula: Deff=D0exp(Ea/RT), with Ea = 81.42 kJ/mol, D0=0.324 mm2/h. |
| |
| Keywords: | potash feldspar potash extraction sodium chloride kinetics molton salt leaching |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《过程工程学报》浏览原始摘要信息 |
|
点击此处可从《过程工程学报》下载全文 |
|
