Erbium-doped fiber amplifier for video distribution networks

The possibility of an application of Er-doped fiber amplifiers to AM-FDM (frequency division multiplexing) or FM-FDM video distribution networks is discussed. The measured noise and modulation distortion properties of ER-doped fiber amplifiers are good enough to meet even the severe quality standards set for trunk lines. A carrier-to-noise ratio (CNR) of 57 dB for an AM-FDM transmission was measured. A second-order harmonic distortion (HD2) of less than -56 dB was measured by the monotone method (modulation depth m=50%), and a cross modulation distortion (XM) of less than -63 dB was measured by the two-tone method (m=25%×channel). On the basis of these values, composite second-order distortion (CSO) and XM in a 40-channel transmission were estimated as less than -57 dB and -73 dB, respectively. Significant reduction of noise and modulation distortion is made possible by optimizing the length of Er-doped fiber amplifiers and using input- and output-port isolators