| V形轮廓零件的普通镗刀数控加工 |
| |
| 引用本文： | 吴孔友. V形轮廓零件的普通镗刀数控加工[J]. 兵工自动化, 2005, 24(6): 50-50 |
| |
| 作者姓名： | 吴孔友 |
| |
| 作者单位： | 许昌烟草机械有限责任公司,机加分厂,河南,许昌,461000 |
| |
| 摘 要： | 数控加工V形轮廓零件时,刀具中心轨迹应偏离工件轮廓一个刀具半径,构成V字形.根据普通镗刀自身特征,在刀具中心轨迹上取若干点,用镗孔方式完成其加工.当刀具在斜面上连续两次下刀时,刀具轮廓间会产生一个残留的凸台,而随着镗削点个数的增加,凸台高度会逐渐减小,直到满足所需技术要求.
|
| 关 键 词： | 数控加工 V形轮廓零件 普通镗刀 |
| 文章编号： | 1006-1576（2005）06-0050-01 |
| 收稿时间： | 2005-05-17 |
| 修稿时间： | 2005-07-18 |
NC Machining of V Profile Parts with Common Boring Cutter |
| |
| WU Kong-you. NC Machining of V Profile Parts with Common Boring Cutter[J]. Ordnance Industry Automation, 2005, 24(6): 50-50 |
| |
| Authors: | WU Kong-you |
| |
| Affiliation: | Machining Branch Factory, Xuchang Tobacco Machinery Co., Ltd, Xuchang 461000, China |
| |
| Abstract: | The trace of the cutter center is one radius of the cutter away to from a V shape when NC machining the V profile parts. According to the characteristic of common boring cutter itself, several points was taken out on the trace of the cutter center, and the machining was finished by means of boring. When the cutter was down twice on the slope plane successively, there is a lug left between the cutter profiles. The height of the lug is reduced gradually smaller and smaller with the increase of boring point until it meets the required technical requirements. |
| |
| Keywords: | NC machining v profile parts Common boring cutter |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
