| CSP工艺不同冷轧压下率低碳钢板退火织构的演变 |
| |
| 引用本文： | 李一鸣,任慧平,金自力,王玉峰,孙昊,李德刚,田荣彬,闫波. CSP工艺不同冷轧压下率低碳钢板退火织构的演变[J]. 包头钢铁学院学报, 2009, 28(1) |
| |
| 作者姓名： | 李一鸣 任慧平 金自力 王玉峰 孙昊 李德刚 田荣彬 闫波 |
| |
| 作者单位： | 李一鸣,任慧平,金自力,王玉峰,孙昊,LI Yi-ming,REN Hui-ping,JIN Zi-li,WANG Yu-feng,SUN Hao(内蒙古科技大学,材料与冶金学院,内蒙古,包头,014010);李德刚,LI De-gang(包头钢铁(集团)公司薄板厂,内蒙古,包头,014010);田荣彬,闫波,TIAN Rong-bin,YAN Bo(包头钢铁,集团,公司薄板厂,内蒙古,包头,014010) |
| |
| 基金项目： | 国家自然科学基金，内蒙古高校科学研究项目 |
| |
| 摘 要： | 采用基于包钢CSP热轧工艺下2.75和4.5 mm现场冷轧至1.0 mm的SPCC钢板,冷轧压下率分别为64%和78%,实验室模拟了罩式退火工艺,并利用XRD测得了冷轧和退火过程中织构的演变.结果表明,两种不同冷轧压下率的钢板在冷轧和退火过程中织构演变规律相似,但是冷轧基料厚度为2.75 mm的钢板在整个过程变化幅度更大,而且成品的织构类型更有利.
|
| 关 键 词： | CSP SPCC钢板 冷轧压下率 退火 织构 |
Annealing texture of CSP low carbon steel sheet under different cold rolling reduction ratio |
| |
| LI Yi-ming,REN Hui-ping,JIN Zi-li,WANG Yu-feng,SUN Hao,LI De-gang,TIAN Rong-bin,YAN Bo. Annealing texture of CSP low carbon steel sheet under different cold rolling reduction ratio[J]. Journal of Baotou University of Iron and Steel Technology, 2009, 28(1) |
| |
| Authors: | LI Yi-ming REN Hui-ping JIN Zi-li WANG Yu-feng SUN Hao LI De-gang TIAN Rong-bin YAN Bo |
| |
| Affiliation: | 1.Material and Metallurgy School; Inner Mongolia University of Science and Technology; Baotou 014010; China; 2.CSP Plant; Baotou Iron and Steel(Group) Co.; China); |
| |
| Abstract: | CSP SPCC steel sheets were cold rolled from 2.75 mm and 4.5 mm to 1.0 mm in Baotou and Steel(Group) Company.The cold rolling reduction ratios were 64% and 78%,respectively.The cover annealing process was simulated in laboratory and the texture during cold rolling and annealing processes was measured by XRD.The results show that although texture evolutions of the two different sheets were similar,the texture rangeability of 2.75 mm sheet is bigger with better texture. |
| |
| Keywords: | CSP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
