| 一种基于进退法的零件排样加速算法 |
| |
| 引用本文： | 罗聪,周驰,王波,阮锋. 一种基于进退法的零件排样加速算法[J]. 锻压装备与制造技术, 2006, 41(2): 64-66 |
| |
| 作者姓名： | 罗聪 周驰 王波 阮锋 |
| |
| 作者单位： | 华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640;华南理工大学,机械工程学院,广东,广州,510640 |
| |
| 基金项目： | 广东省广州市科技攻关项目;广东省科技厅科技计划;粤港关键领域重点突破项目 |
| |
| 摘 要： | 一步平移平行线分割法在冲压毛坯自动排样设计领域已经得到比较广泛的应用，但是其算法比较复杂，当排样精度要求高时，将直接导致程序运行效率降低。为解决搜索求解计算量大的问题，本文在一步平移平行线分割法的基础上提出了一种基于进退法的加速搜索优化算法，可以在较大程度上提高程序运行效率，缩短设计时间。
|
| 关 键 词： | 机械制造 排样 冲裁件 进退法 |
| 文章编号： | 1672-0121(2006)02-0064-03 |
| 修稿时间： | 2006-01-19 |
An Accelerated Algorithm of Blank Layout Based on the Parallel Moving Method |
| |
| LUO Cong,ZHOU Chi,WANG Bo,RUAN Feng. An Accelerated Algorithm of Blank Layout Based on the Parallel Moving Method[J]. China Metalforming Equipment & Manufacturing Technology, 2006, 41(2): 64-66 |
| |
| Authors: | LUO Cong ZHOU Chi WANG Bo RUAN Feng |
| |
| Abstract: | The parallel moving method has been widely applied to the design of automatic blank layout. But the program based on this method had low caculating efficiency while the high precision is required, because of the high complexity of the method. To solve the problem of large solution searching computation, an improved optimization algorithm based on the improved advance and retreat method has been proposed and it can raise the solution efficiency significantly. |
| |
| Keywords: | Machinery manufacture Blank Layout Blanking Parallel moving advance and retreat method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
