| 新一代MK2120数控内圆磨床部分结合面的有限元建模及优化 |
| |
| 引用本文： | 郁文恺,易红,陈南,汤文成.新一代MK2120数控内圆磨床部分结合面的有限元建模及优化[J].机械制造与自动化,2002(2):17-18,21. |
| |
| 作者姓名： | 郁文恺 易红 陈南 汤文成 |
| |
| 作者单位： | 1. 无锡机床股份有限公司,江苏,无锡,214061
2. 东南大学机械工程系,江苏,南京,210096 |
| |
| 摘 要： | 通过采用线性弹簧 阻尼单元分析螺栓固定结合面 ,应用优化参数的方法来修正带接触单元的结合面特征参数 ,与试验结果能较好吻合 ,提供了一种准确的分析研究方法
|
| 关 键 词： | 结合面 线性弹簧阻尼单元 优化 |
| 文章编号： | 1671-5276(2002)02-0017-02 |
Modeling And optimization of the Joining Surface for New Generation CNC MK2120 Internal |
| |
| YU Wei kan ,YI Hong ,CHEN Nan ,TANG Wen cheng.Modeling And optimization of the Joining Surface for New Generation CNC MK2120 Internal[J].Machine Building & Automation,2002(2):17-18,21. |
| |
| Authors: | YU Wei kan YI Hong CHEN Nan TANG Wen cheng |
| |
| Affiliation: | YU Wei kan 1,YI Hong 2,CHEN Nan 2,TANG Wen cheng 2 |
| |
| Abstract: | The charateristic parameters for the fastening and joining surface with contact element are modified by means of linear spring-damper element analysis and application of optimized parameters.The result is well coincient with that obtained in experiments.Hence an accurate analysis and research method is provided. |
| |
| Keywords: | joining surface linear spring damper element optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
