| 基于Profibus_DP的柔性制造系统的设计 |
| |
| 引用本文： | 齐继阳,竺长安.基于Profibus_DP的柔性制造系统的设计[J].组合机床与自动化加工技术,2007(9):9-11. |
| |
| 作者姓名： | 齐继阳 竺长安 |
| |
| 作者单位： | 1. 合肥工业大学CIMS研究所,合肥,230009;中国科学技术大学,精密机械与精密仪器系,合肥,230026
2. 中国科学技术大学,精密机械与精密仪器系,合肥,230026 |
| |
| 摘 要： | 为提高自己对外界环境变化的响应速度,国内外先进企业纷纷建造柔性制造系统。系统的实时通信是实现柔性制造系统的关键技术,针对传统柔性制造系统中通信方式的缺陷,文中提出了以现场总线Profibus_DP作为柔性制造系统的通信方式,构建了三层柔性制造系统的控制结构,探讨了一类主站和二类主站之间以及主站和从站之间的通信实现方法,最后通过JK_FMS柔性制造系统的开发,验证了该方案的可行性。
|
| 关 键 词： | 柔性制造系统 控制结构 |
| 文章编号： | 1001-2265（2007）09-0009-03 |
| 修稿时间： | 2007-03-28 |
Designing and Implement of Flexible Manufacturing System Base on Profibus_DP |
| |
| QI Ji-yang,ZHU Chang-an.Designing and Implement of Flexible Manufacturing System Base on Profibus_DP[J].Modular Machine Tool & Automatic Manufacturing Technique,2007(9):9-11. |
| |
| Authors: | QI Ji-yang ZHU Chang-an |
| |
| Affiliation: | 1. CIMS Institute, Hefei University of Technology, Hefei 230009, China ; 2. Department of Precision Machin- ery and Precision Instrumentation, University of Science and Technology of China, Hefei 230026, China |
| |
| Abstract: | In order to improve its responsiveness on the changes in the environment,More and more enterprises in China and Abroad are building flexible manufacturing systems.Real time communication is a key technology for the flexible manufacturing system.However the communication mechanism is not ideal in the traditional flexible manufacturing systems.In the paper,Profibus_DP is used to be the communication method for the flexible manufacturing system,and three-level control architecture is also proposed,the communications between the first class master station and the second class master station,between master station and slave station are also discussed,finally the JK_FMS flexible manufacturing system is built to demonstrate the feasibility of the proposal. |
| |
| Keywords: | Profibus_DP |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
