| 超声波焊接制备功能梯度材料 |
| |
| 引用本文： | 朱政强,吴宗辉,曾纯,王倩. 超声波焊接制备功能梯度材料[J]. 电焊机, 2011, 41(4): 72-75 |
| |
| 作者姓名： | 朱政强 吴宗辉 曾纯 王倩 |
| |
| 作者单位： | 南昌大学机电工程学院; |
| |
| 基金项目： | 国家自然科学基金资助项目(50865007); 江西省教育厅2010年度科技计划重点项目(GJJ10013) |
| |
| 摘 要： | 采用超声波焊接的方法成功制备了功能梯度材料,它具有简便、环保、快速成型的特点.实验以铝合金6061、3003、纯钛、钛合金Ti-6Al-4V和纯镍为材料,利用超声波焊接方法制备Al/Ti/Ni功能梯度材料.通过金相显微分析、显微硬度分析、EDS分析对其焊接界面的微观结构、显微硬度、焊缝原子扩散程度进行测试和表征.结果表...
|
| 关 键 词： | 功能梯度材料 超声波焊接 金相分析 显微硬度分析 EDS分析 |
Study on the functional gradient materials prepared by ultrasonic welding |
| |
| ZHU Zheng-qiang,WU Zong-hui,ZENG Chun,WANG Qian. Study on the functional gradient materials prepared by ultrasonic welding[J]. Electric Welding Machine, 2011, 41(4): 72-75 |
| |
| Authors: | ZHU Zheng-qiang WU Zong-hui ZENG Chun WANG Qian |
| |
| Affiliation: | ZHU Zheng-qiang,WU Zong-hui,ZENG Chun,WANG Qian(School of Mechanical & Electrical Engineering,NanchangUniversity,Nanchang,330031,China) |
| |
| Abstract: | This article takes the lead in using ultrasonic welding method successfully to prepare Ti/Al/Ni functional gradient materials with 6061 aluminum alloy,pure titanium,titanium alloy,3003Ti-6Al-4V and pure nickel.This method is simple,environment-friendly and forming rapid,its welding interface microstructure,microhardness,weld atomic diffusion degree was investigated by metallographic micro-structure,micro-hardness and EDS analysis.The results showed that the combining form of the joint is often accompanied b... |
| |
| Keywords: | functional gradient materials ultrasonic welding metallographic analysis microhardness analysis EDS analysis |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
