| 曲轴毛坯冲孔模设计 |
| |
| 引用本文： | 王劲,赵宏伟,李付国,穆安乐. 曲轴毛坯冲孔模设计[J]. 模具工业, 2005, 0(1): 23-26 |
| |
| 作者姓名： | 王劲 赵宏伟 李付国 穆安乐 |
| |
| 作者单位： | 西安理工大学,陕西,西安,710048;西北工业大学,陕西,西安,710072 |
| |
| 摘 要： | 在曲轴毛坯冲孔模设计中 ,针对曲轴毛坯的特殊形状 ,采用了浮动定位机构、组合凸模部件、芯棒凹模的定位与复位机构 ,选取大冲裁间隙 ,在生产中取得了良好效果
|
| 关 键 词： | 冲孔 曲轴毛坯 斜楔斜滑块机构 |
| 文章编号： | 1001-2168(2005)01-0023-04 |
| 修稿时间： | 2004-03-06 |
Design of the Piercing Die for Bent Shaft Blanks |
| |
| WANG Jin ,ZHAO Hong-wei ,LI Fu-guo ,MU An-le. Design of the Piercing Die for Bent Shaft Blanks[J]. Die & Mould Industry, 2005, 0(1): 23-26 |
| |
| Authors: | WANG Jin ZHAO Hong-wei LI Fu-guo MU An-le |
| |
| Affiliation: | WANG Jin 1,ZHAO Hong-wei 1,LI Fu-guo 2,MU An-le 1 |
| |
| Abstract: | In the design of the piercing die for the bent shaft blank,according to the special shape of the blank,floating location mechanism,combined punch,location and reposition mechanism for the axle matrix have been adopted,and big cutting clearances have been selected.Good result has been obtained in production by using this piercing die. |
| |
| Keywords: | piercing bent shaft blank cam driver slanted slide mechanism |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
