首页 | 本学科首页   官方微博 | 高级检索  
     

PLC在组合机床控制中的应用与程序编制
引用本文:陈旭武,刘东汉.PLC在组合机床控制中的应用与程序编制[J].机械制造与自动化,2006,35(4):180-182.
作者姓名:陈旭武  刘东汉
作者单位:黄石理工学院,湖北,黄石,435003
摘    要:介绍了日本三菱公司FXON系列PLC在两工位钻孔、攻丝组合机床上的应用;分析了组合机床的组成、功能及控制要求;给出了输入输出分配表;编制自动控制程序、状态转移图,并实现了故障检测诊断。

关 键 词:组合机床  步进指令  程序编制
文章编号:1671-5276(2006)04-0180-03
收稿时间:2005-11-24
修稿时间:2005-11-24

Program and Application of PLC in the Combined Machine Tool Control
CHEN Xu-wu,LIU Dong-han.Program and Application of PLC in the Combined Machine Tool Control[J].Machine Building & Automation,2006,35(4):180-182.
Authors:CHEN Xu-wu  LIU Dong-han
Affiliation:Huangshi Institute of Technology, HB Huangshi 435003, China
Abstract:This paper introduces the application of FXON PLC from Japan in combined machine tools.The authors analyze the construction,function and control conditions of the combined machine tools,put forward the distribution table,and programming the automation control program.The examination and diagnosis of breakdown are realized.
Keywords:PLC
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号