| 原料粉末对纳米Cu-30％Ag合金粉粒特性的影响 |
| |
| 引用本文： | 邹敏明,黄伟,刘勇,尚福军,赵洁,易更.原料粉末对纳米Cu-30％Ag合金粉粒特性的影响[J].兵器材料科学与工程,2012,35(5):26-28. |
| |
| 作者姓名： | 邹敏明 黄伟 刘勇 尚福军 赵洁 易更 |
| |
| 作者单位： | 中国兵器科学研究院宁波分院,浙江 宁波,315103;中国兵器科学研究院宁波分院,浙江 宁波,315103;中国兵器科学研究院宁波分院,浙江 宁波,315103;中国兵器科学研究院宁波分院,浙江 宁波,315103;中国兵器科学研究院宁波分院,浙江 宁波,315103;中国兵器科学研究院宁波分院,浙江 宁波,315103 |
| |
| 基金项目： | 宁波市自然科学基金(2010A610167);中国兵器科学研究院宁波分院院列基金 |
| |
| 摘 要： | 利用感应等离子制备了纳米Cu-30%Ag(质量分数)合金粉,研究原料粉对纳米粉形貌、粒径的影响。结果表明,在感应等离子工艺参数不变条件下,随着原料粉粒径由35.9μm减小至20.1μm和11.3μm,纳米Cu-30%Ag(质量分数)合金粉尺寸逐渐由274 nm细化至105 nm和89 nm,但原料粉对纳米粉的形貌无明显影响。
|
| 关 键 词： | 原料粉末 纳米Cu-Ag合金粉 粉粒特性 感应等离子 |
Effect of raw material powder on the particle characteristic of Cu-30%Ag alloy nanopowders |
| |
| ZOU Minming,HUANG Wei,LIU Yong,SHANG Fujun,ZHAO Jie,YI Geng.Effect of raw material powder on the particle characteristic of Cu-30%Ag alloy nanopowders[J].Ordnance Material Science and Engineering,2012,35(5):26-28. |
| |
| Authors: | ZOU Minming HUANG Wei LIU Yong SHANG Fujun ZHAO Jie YI Geng |
| |
| Affiliation: | (Ningbo Branch of China Academy of Ordnance Science,Ningbo 315103,China) |
| |
| Abstract: | Cu-30%(mass fraction) Ag alloy nanopowders were prepared by induction plasma system,and the effect of raw materials on size distribution of nanopowders was studied.The results show that with the same processing parameters of induction plasma,the size of the prepared Cu-30Ag alloy nanopowders is refined from 274 nm to 105 nm and then to 89 nm respectively when the different size raw materials of 35.9 μm,20.1 μm and 11.3 μm are used,and the raw materials have no obvious effect on the morphologies of nanopowders. |
| |
| Keywords: | raw materials powder Cu-Ag alloy nanopowders particle characteristic induction plasma |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
