首页 | 本学科首页   官方微博 | 高级检索  
     

基于SimCont的AP1000非能动安全壳冷却系统仿真实现
引用本文:魏巍,魏来,陈艳芳,谭超,林旭升. 基于SimCont的AP1000非能动安全壳冷却系统仿真实现[J]. 原子能科学技术, 2013, 47(5): 794-797. DOI: 10.7538/yzk.2013.47.05.0794
作者姓名:魏巍  魏来  陈艳芳  谭超  林旭升
作者单位:1.哈尔滨工程大学 核安全与仿真技术国防重点学科实验室,黑龙江 哈尔滨150001;2.中核武汉核电运行技术股份有限公司,湖北 武汉430223;3.三门核电有限公司,浙江 三门317112
摘    要:应用SimCont程序对AP1000核电厂非能动安全壳冷却系统进行仿真建模,并以主蒸汽管道破裂、冷却剂环路冷管段双端断裂等最严重的设计基准事故为研究对象,仿真分析非能动安全壳冷却系统的响应和主要设备的功能实现,对仿真程序进行综合评价。结果表明:SimCont程序仿真模型能很好地反映出非能动安全壳冷却系统的功能,计算结果与安全分析报告基本吻合。

关 键 词:安全壳   SimCont程序   非能动   仿真

Simulation of AP1000 Passive Containment Cooling System Based on SimCont
WEI Wei,WEI Lai,CHEN Yan-fang,TAN Chao,LIN Xu-sheng. Simulation of AP1000 Passive Containment Cooling System Based on SimCont[J]. Atomic Energy Science and Technology, 2013, 47(5): 794-797. DOI: 10.7538/yzk.2013.47.05.0794
Authors:WEI Wei  WEI Lai  CHEN Yan-fang  TAN Chao  LIN Xu-sheng
Affiliation:1.Key Discipline Laboratory of Nuclear Safety and Simulation Technology, Harbin Engineering University, Harbin 150001, China;2.China Nuclear Power Operation Technology Corporation, Ltd., Wuhan 430223, China;3.Sanmen Nuclear Power Co. Ltd., Sanmen 317112, China
Abstract:The simulation of AP1000 passive containment cooling system based on SimCont was studied. The transient response of passive containment cooling system and the functional performances of the main equipments were simulated and the simulation tool was comprehensively assessed aiming at the main steam line break accident and the double-ended break of cold leg of coolant loop accident which were the most severe design basis accidents. The code’s performance was estimated. The results show that the model of SimCont can well reflect the function of passive containment cooling system, and the calculation results are consistent with that in the safety analysis report.
Keywords:containment  SimCont code  passive  simulation
点击此处可从《原子能科学技术》浏览原始摘要信息
点击此处可从《原子能科学技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号