| 热流道精密成型模具的研究 |
| |
| 引用本文： | 尹清珍,宗殿瑞,邹海峰.热流道精密成型模具的研究[J].模具工业,2000(5):32-35. |
| |
| 作者姓名： | 尹清珍 宗殿瑞 邹海峰 |
| |
| 作者单位： | 1. 青岛化工学院,山东青岛,266042
2. 海尔集团 |
| |
| 摘 要： | 分析了热流道模具的热平衡状态 ,提出了对热流道板中熔融塑料温度的控制方法及减少注射过程中流道内压力损失的措施 ,对精密塑件的成型有参考价值
|
| 关 键 词： | 温度 压力 热流道 模具 |
| 修稿时间： | 1999-11-08 |
Study on the Precision Hot-Runner Mould |
| |
| Yi Qingzhen.Study on the Precision Hot-Runner Mould[J].Die & Mould Industry,2000(5):32-35. |
| |
| Authors: | Yi Qingzhen |
| |
| Abstract: | An analysis was made on the heat balance status of the hot_runner mould. The method for controlling the melted plastics temperature in the hot_runner plate and the measure for decreasing the pressure loss in the hot runner when injecting were put forward, which are of reference value to the moulding of the precision plastic parts. |
| |
| Keywords: | temperature pressure hot runner mould |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
