| 涡轮叶片锥束体积CT检测系统软件原型 |
| |
| 引用本文： | 程云勇,张定华,赵歆波,毛海鹏. 涡轮叶片锥束体积CT检测系统软件原型[J]. 中国机械工程, 2005, 16(20): 1835-1839 |
| |
| 作者姓名： | 程云勇 张定华 赵歆波 毛海鹏 |
| |
| 作者单位： | 西北工业大学现代设计与集成制造技术教育部重点实验室,西安,710072 |
| |
| 摘 要： | 给出了检测系统软件原型的总体结构和数据流设计.研究了图像序列快速重建、高精度图像边缘检测、叶片点云模型与CAD设计模型配准、叶片壁厚检测与铸造缺陷分析等关键模块的实现方法.软件原型由C 6.0编程实现.仿真测试表明该软件可基于空心涡轮叶片的锥束体积CT扫描数据对叶片的外型轮廓偏差、壁厚和铸造缺陷进行检测分析.
|
| 关 键 词： | 涡轮叶片 锥速体积CT 无损检测 软件原型 |
| 文章编号： | 1004-132X（2005）20-1835-05 |
| 收稿时间： | 2004-11-10 |
| 修稿时间： | 2004-11-10 |
Software Prototype of the Turbine Blade Cone-Beam Volume CT Inspection System |
| |
| Cheng Yunyong,Zhang Dinghua,Zhao Xinbo,Mao Haipeng. Software Prototype of the Turbine Blade Cone-Beam Volume CT Inspection System[J]. China Mechanical Engineering, 2005, 16(20): 1835-1839 |
| |
| Authors: | Cheng Yunyong Zhang Dinghua Zhao Xinbo Mao Haipeng |
| |
| Abstract: | The general architecture and data flow design for the software prototype of the inspection system were presented in this paper.The related research work were mainly focused on the implementing methods for the key modules of the software prototype,including: slice image stack fast reconstruction,high accuracy image edge detection,inspection model and CAD model alignment,wall thickness inspection and casting defects extraction etc.The software prototype was developed with Visual(C )6.0.Simulation results show that the software prototype is of the ability to perform hollow turbine blade profile deviation,wall thickness,and casting defects analysis based on its CBVCT scanning data. |
| |
| Keywords: | turbine blade cone-beam volume CT(CBVCT) non-destructive testing software prototype |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
