Investigation into a gas–solid–solid three-phase fluidized-bed carbonator to capture CO2 from combustion flue gas

A two-dimensional (2D) transient model was developed to simulate the local hydrodynamics of a gas (flue gas)–solid (CaO)–solid (CaCO₃) three-phase fluidized-bed carbonator using the computational fluid dynamic method, where the chemical reaction model was adopted to determine the molar fraction of CO₂ at the exit of carbonator and the partial pressure of CO₂ in the carbonator. This investigation was intended to improve an understanding of the chemical reaction effects of CaO with CO₂ on the CO₂ capture efficiency of combustion flue gases. For this purpose, we had utilized Fluent 6.2 to predict the CO₂ capture efficiency for different operation conditions. The adopted model concerning the reaction rate of CaO with CO₂ is joined into the CFD software. Model simulation results, such as the local time-averaged CO₂ molar fraction and conversion of CaO, were validated by experimental measurements under varied operating conditions, e.g., the fraction of active CaO, chemical reaction temperature, particle size, and cycle number at different locations in a gas–solid–solid three-phase fluidized bed carbonator. Furthermore, the local transient hydrodynamic characteristics, such as gas molar fraction and partial pressure were predicted reasonably by the chemical reaction model adopted for the dynamic behaviors of the gas–solid–solid three-phase fluidized bed carbonator. On the basis of this analysis, capture CO₂ strategies to reduce CO₂ molar fraction in exit of carbonator reactor can be developed in the future. It is concluded that a fluidized bed of CaO can be a suitable reactor to achieve very effective CO₂ capture from combustion flue gases.