Diamond wear properties in cold plasma jet |
| |
| Affiliation: | 1. National Engineering Research Centre for High Efficiency Grinding, Hunan University, Changsha, Hunan, 410082, PR China;2. School of Mechanical & Mining Engineering, The University of Queensland, QLD4072, Australia;1. Key Laboratory of Mechanism Theory and Equipment Design of Ministry of Education, School of Mechanical Engineering, Tianjin University, China;2. Department of Mechanical Engineering, Northwestern University, USA |
| |
| Abstract: | Cold plasma jet is applied to control the contact interface and restrain the diamond wear when cutting ferrous metals. A new generation device was developed to generate stable cold plasma jet under atmospheric pressure. Friction & wear tests and thermal analysis experiments were conducted on a mirror steel NAK80/diamond friction pair in atmospheres of air, nitrogen, and nitrogen cold plasma jet (NPJ), respectively. The friction and diamond graphitization rules were determined through the experiments. Results proved that the friction pair exhibited the best friction and wear properties in NPJ atmosphere. When the rotation speed was ≥ 300 r/min, the nitrogen cold plasma atmosphere was found to reduce the friction coefficient of the friction pair, and the friction coefficient tended to be stable when the load was ≥ 50 N. Moreover, the graphitization temperature of diamond increased from 885 °C to 1185 °C after NPJ treatment. |
| |
| Keywords: | |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
