In situ FTIR micro-spectroscopy to investigate polymeric fibers under supercritical carbon dioxide: CO2 sorption and swelling measurements

An original experimental set-up combining a FTIR (Fourier Transformed InfraRed) microscope with a high pressure cell has been built in order to analyze in situ and simultaneously the CO₂ sorption and the polymer swelling of microscopic polymer samples, such as fibers, subjected to supercritical carbon dioxide. Thanks to this experimental set-up, we have determined as a function of the CO₂ pressure (from 2 to 15 MPa) the CO₂ sorption and the polymer swelling at T = 40 °C of four polymer samples, namely PEO (polyethylene oxide), PLLA (poly-l-lactide acid), PET (polyethylene terephtalate) and PP (polypropylene). The quantity of CO₂ sorbed in all the studied polymers increases with pressure. PEO and PLLA display a significant level of CO₂ sorption (20 and 25% respectively, at P = 15 MPa). However, we observe that a lower quantity of CO₂ can be sorbed into PP and PET (7 and 8% respectively, at P = 15 MPa). Comparing their thermodynamic behaviors and their intrinsic properties, we emphasize that a high CO₂ sorption can be reach if on one hand, the polymer is able to form specific interaction with CO₂ in order to thermodynamically favor the presence of CO₂ molecules inside the polymer and on the other, displays high chains mobility in the amorphous region. PLLA and PEO fulfilled these two requirements whereas only one property is fulfilled by PET (specific interaction with CO₂) and PP (high chains mobility). Finally, we have found that for a given CO₂ sorption, the resulting swelling of the polymer depends mainly on its crystallinity.