| The Stress Distribution and Thermal Behavior of TiBN and TiBN／TiN Coatings in Milling AISI H13 Work Tool Steel |
| |
| 引用本文： | YANHong HUAJiang SHIVPURIRaja. The Stress Distribution and Thermal Behavior of TiBN and TiBN／TiN Coatings in Milling AISI H13 Work Tool Steel[J]. 武汉理工大学学报(材料科学英文版), 2005, 20(1): 1-5. DOI: 10.1007/BF02870860 |
| |
| 作者姓名： | YANHong HUAJiang SHIVPURIRaja |
| |
| 作者单位： | [1]InstituteofMechanical-ElectricalEngineering,NanchangUniversity,Nanchang330029,China [2]TheOhioStateUniversity（Columbus）,NanchangUniversity,Nanchang330029,China |
| |
| 基金项目： | Funded by the National Natural Science Foundation of China (No.50465003)，the Natural Science Foundation of Jiangxi Province (No.0350005)，the State Key Laboratory Foundation of Die Technology at Huazhong University of Science and Technology (No.04 8) |
| |
| 摘 要： | The FEM model of TiBN ant TiBNI TiN coated cutting tool in milling of H13 steel was developed. Process variables such as temprature and stress in the coating layer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 to collect the relevant tool life and force data. The results show that the stress in a coated tool can significantly be reduced compared to an uncoated cutting tool, possibly due to surface coatings improving the tribolagical properties of cutting tools. Coatings with good thermal properties also help to improve the thermal behavior of cutting tool.
|
| 关 键 词： | AISI H13 工具钢 TiBN／TiN涂层 热性能 应力分布 |
| 收稿时间： | 2004-04-12 |
| 修稿时间： | 2004-12-25 |
The stress distribution and thermal behavior of TiBN and TiBN/TiN coatings in milling AISI H13 work tool steel |
| |
| Yan Hong Ph D,Hua Jiang,Shivpuri Raja. The stress distribution and thermal behavior of TiBN and TiBN/TiN coatings in milling AISI H13 work tool steel[J]. Journal of Wuhan University of Technology. Materials Science Edition, 2005, 20(1): 1-5. DOI: 10.1007/BF02870860 |
| |
| Authors: | Yan Hong Ph D Hua Jiang Shivpuri Raja |
| |
| Affiliation: | (1) Institute of Mechanical-Electrical Engineering, Nanchang University, 330029 Nanchang, China;(2) The Ohio State University (Columbus), Columbus, USA |
| |
| Abstract: | The FEM model of TiBN and TiBN/TiN coated cutting tool in milling of H13 steel w as developed. Process variables such as temperature and stress in the coating l ayer as well as in the substrate were analyzed. The efficacy of the present FEM analysis was verified by conducting controlled milling experiments on AISI H13 t o collect the relevant tool life and force data.The results show that the stress in a coated tool can significantly be reduced compared to an uncoated cutting t ool,possibly due to surface coatings improving the tribological properties of cu tting tools.Coatings with good thermal properties also help to improve the therm al behavior of cutting tool. |
| |
| Keywords: | TiBN and TiBN/TiN coating AISI H13 work tool stee l milling simulation |
| 本文献已被 CNKI 维普 万方数据 SpringerLink 等数据库收录！ |
