| 后遮流板结构尺寸对指尖密封性能影响的研究 |
| |
| 引用本文： | 陈国定,吴昊天. 后遮流板结构尺寸对指尖密封性能影响的研究[J]. 中国机械工程, 2004, 15(1): 11-13 |
| |
| 作者姓名： | 陈国定 吴昊天 |
| |
| 作者单位： | 西北工业大学机电学院,西安,710072 |
| |
| 基金项目： | 航空科学基金资助项目 (0 1C53 0 17)，陕西省自然科学基金资助项目 (2 0 0 2 E2 2 8) |
| |
| 摘 要： | 采用有限元接触模型分析了在不同压差条件下，三种后遮流板结构尺寸对指尖密封的迟滞特性和刚度的影响。研究表明，后遮流板结构尺寸在不同压差条件下对指尖密封迟滞特性和刚度的影响表现出不同的特点。从综合影响角度考虑，具有较小后遮流板内径的指尖密封体现出更为优良的低迟滞和低刚度的综合特性。
|
| 关 键 词： | 指尖密封 有限元 迟滞特性 刚度 |
| 文章编号： | 1004-132X(2004)01-0011-03 |
Research to the Influence of Aft Cover Plate Construction on the Finger Seal Performances |
| |
| Chen Guoding Wu Haotian Northwestern Polytechnical University,Xi'an. Research to the Influence of Aft Cover Plate Construction on the Finger Seal Performances[J]. China Mechanical Engineering, 2004, 15(1): 11-13 |
| |
| Authors: | Chen Guoding Wu Haotian Northwestern Polytechnical University Xi'an |
| |
| Affiliation: | Chen Guoding Wu Haotian Northwestern Polytechnical University,Xi'an,710072 |
| |
| Abstract: | Influence of aft cover plate construction on the hysteresis and the stiffness under the conditions of different pressure differential was analyzed by using the FEM (Finite Element Method) model in current work. The research work indicates that this influence of aft cover plate shows different appearances with different operation conditions. After extensive analytical work, a significant conclusion can be arrived at that the finger seal assembled with aft cover plate of smaller bore diameter has better synthetical characteristics of low hysteresis and stiffness. |
| |
| Keywords: | finger seal FEM hysteresis stiffness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
