| 考虑硬度的高弹性合金钢3J33微细特征磨削仿真分析及实验研究 |
| |
| 引用本文： | 徐路遥,李蓓智,杨建国.考虑硬度的高弹性合金钢3J33微细特征磨削仿真分析及实验研究[J].中国机械工程,2019,30(1):17. |
| |
| 作者姓名： | 徐路遥 李蓓智 杨建国 |
| |
| 作者单位： | 东华大学机械工程学院，上海，201620 |
| |
| 基金项目： | 国家自然科学基金资助项目（51675096）
National Natural Science Foundation of China （No. 51675096） |
| |
| 摘 要： | 针对高弹性合金钢3J33的难加工性与实验复杂性问题，在其加工过程中进行了仿真模拟的研究。基于弹塑性力学、磨削加工机理和有限元分析等理论，利用专业金属切削仿真软件AdvantEdge，构建了考虑硬度的单颗磨粒磨削细筋的残余应力仿真模型，对不同硬度下磨削时的细筋残余应力进行了仿真分析和对比，并通过实验加以论证，最终验证了优化后的仿真模型具有可靠性。
|
| 关 键 词： | 挠性接头 硬度 残余应力 微细特征 |
Simulation Analysis and Experimental Validation of Micro-feature Grinding for High-elastic Alloy Steel 3J33 with Considering Hardness |
| |
| XU Luyao,LI Beizhi,YANG Jianguo.Simulation Analysis and Experimental Validation of Micro-feature Grinding for High-elastic Alloy Steel 3J33 with Considering Hardness[J].China Mechanical Engineering,2019,30(1):17. |
| |
| Authors: | XU Luyao LI Beizhi YANG Jianguo |
| |
| Affiliation: | College of Mechanical Engineering,Donghua University,Shanghai，201620 |
| |
| Abstract: | Aiming at the problems of machining difficulty and experimental complexity of high-elastic alloy steel 3J33, a simulation study was carried out in the machining processes. Based on the elastic-plastic mechanics, grinding mechanism and finite element analysis, considering hardness for single grain grinding thin rib a residual stress simulation model was established by professional metal cutting simulation software AdvantEdge. Simulation analyses and comparisons of the residual stresses of different hardnesses for thin ribs were conducted when grinding and verified through the experiments. Finally, the reliability of the optimized simulation model was verified. |
| |
| Keywords: | flexible joint hardness residual stress micro-feature |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《中国机械工程》浏览原始摘要信息 |
|
点击此处可从《中国机械工程》下载全文 |
