| 基于流动模拟的注射模流动平衡设计 |
| |
| 引用本文： | 王振飞,陈静波,刘春太,申长雨.基于流动模拟的注射模流动平衡设计[J].模具工业,2000(8):13-16. |
| |
| 作者姓名： | 王振飞 陈静波 刘春太 申长雨 |
| |
| 作者单位： | 郑州工业大学,河南,郑州,450002 |
| |
| 摘 要： | 介绍了一种基于流动模拟自动实现多型腔注射模流动平衡的方法。利用该方法可在流道和型腔布置设定好后 ,根据流动模拟软件的输出结果 ,通过迭代计算得到优化的流道和浇口尺寸
|
| 关 键 词： | 流动平衡 注射模 流动模拟 |
| 修稿时间： | 1999年12月7日 |
Design of the Flowing Balance of the Injection Mould Based on Flowing Simulation |
| |
| Wang Zhenfei et al.Design of the Flowing Balance of the Injection Mould Based on Flowing Simulation[J].Die & Mould Industry,2000(8):13-16. |
| |
| Authors: | Wang Zhenfei |
| |
| Affiliation: | Wang Zhenfei et al |
| |
| Abstract: | A method based on flowing simulation to automatically realize the flowing balance of the multi_cavity injection mould was introduced. By adopting the method, optimized runners and gate dimensions could be gained through iterative calculation according to the output results of the flowing simulation software after the location of the runners and cavities were fixed. |
| |
| Keywords: | flowing balance injection mould flowing simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
