| 基于并联机构铣床工作台的设计 |
| |
| 引用本文： | 许子红,马履中,马晓丽,唐卫星. 基于并联机构铣床工作台的设计[J]. 工程设计学报, 2007, 14(4): 295-298 |
| |
| 作者姓名： | 许子红 马履中 马晓丽 唐卫星 |
| |
| 作者单位： | 江苏大学,机械工程学院,江苏,镇江,212013;江苏大学,机械工程学院,江苏,镇江,212013;衢州学院,机电系,浙江,衢州,324000 |
| |
| 基金项目： | 国家自然科学基金 , 教育部高等学校博士学科点专项科研基金 , 浙江省自然科学基金 |
| |
| 摘 要： | 基于并联机器人机构的运动输出理论, 考虑结构的对称性和解耦性, 构造出一种新型的具有二平移一转动的三自由度并联机器人机构，给出了机构的运动学反解模型,并用MATLAB计算出其位置正解。以图解形式描绘该机构的可达工作空间，找出影响定姿态工作空间的因素，并提供了该机构在铣床上的具体应用实例。该机构良好的对称性和解耦性，为系统控制带来了方便。
|
| 关 键 词： | 并联机构 单开链 运动学 反解 工作空间 |
| 文章编号： | 1006-754X（2007）04-0295-04 |
| 收稿时间： | 2006-12-07 |
| 修稿时间： | 2006-12-07 |
Design of milling machine worktable based on parallel manipulators |
| |
| XU Zi-hong,MA Lü-zhong,MA Xiao-li,TANG Wei-xing. Design of milling machine worktable based on parallel manipulators[J]. Journal of Engineering Design, 2007, 14(4): 295-298 |
| |
| Authors: | XU Zi-hong MA Lü-zhong MA Xiao-li TANG Wei-xing |
| |
| Affiliation: | 1. College of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China；
2. Mechanical and Electrical Department, Quzhou College, Quzhou 324000, China |
| |
| Abstract: | Based on motion output theory of parallel mechanism,and considering symmetry and decoupling property of its structure,a novel 3-DOF(two translations and one rotation) parallel robot mechanism was put forward.And then kinematics problems of position inverse modeling were presented and numerical solution was obtained by Matlab.Furthermore,the reachable workspace of this mechanism is described by drawing method and factors influencing it were found.Its application on a milling machine is offered.This mechanism has good symmetry and decoupling property and gives convenience to system control. |
| |
| Keywords: | parallel manipulator single-opened-chain kinematics inverse resolution workspace |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
| 点击此处可从《工程设计学报》浏览原始摘要信息 |
|
点击此处可从《工程设计学报》下载免费的PDF全文 |
|
