| 30CrNi3A压板裂纹原因分析 |
| |
| 引用本文： | 王新成,张全新,徐鸿昊.30CrNi3A压板裂纹原因分析[J].物理测试,2019,37(1):40-43. |
| |
| 作者姓名： | 王新成 张全新 徐鸿昊 |
| |
| 作者单位： | 1. 宝山钢铁股份有限公司钢管条钢事业部， 上海 200122 ; 2. 重庆钢铁研究所有限公司， 重庆 400084 |
| |
| 摘 要： | 通过对失效压板取样进行化学成分、硬度和金相高低倍检测，结合钢坯的高倍和低倍金相组织观察，分析讨论了压板裂纹产生的原因。结果表明，30CrNi3A钢坯心部较严重的带状组织偏析是导致成品压板淬火热处理后形成裂纹的主要原因，钢坯中部集中分布的硫化物夹杂在热处理过程中促进了裂纹的形成和扩展。
|
| 关 键 词： | 30CrNi3A 压板 裂纹 带状偏析 |
| 收稿时间： | 2018-06-12 |
Causes analysis of crack of 30CrNi3A pressplate |
| |
| WANG Xin-cheng,ZHANG Quan-xin,XU Hong-hao.Causes analysis of crack of 30CrNi3A pressplate[J].Physics Examination and Testing,2019,37(1):40-43. |
| |
| Authors: | WANG Xin-cheng ZHANG Quan-xin XU Hong-hao |
| |
| Affiliation: | （1. Steel Pipe and Bar Steel Department， Baoshan Iron and Steel Co.， Ltd.， Shanghai 200122， China ; 2. Chongqing Iron and Steel Research Institute Co.， Ltd.， Chongqing 400084，China） |
| |
| Abstract: | The causes of cracks in pressplate were analyzed by the detection of chemical composition， hardness and metallographic observation. The results showed that the serious banded segregation in the core of the 30CrNi3A billet was the main reason for the crack in the finished plate after quenching， and the sulfide inclusion concentrated distributed in the core of the billet could promote the crack formation and propagation during heat treatment. |
| |
| Keywords: | 30CrNi3A pressplate crack Banded segregation |
| 本文献已被 CNKI 等数据库收录！ |
| 点击此处可从《物理测试》浏览原始摘要信息 |
|
点击此处可从《物理测试》下载全文 |
