| Abstract: | In correlation‐based signal separation algorithms, the received mixed signals are fed to a de‐coupling system designed to minimize the output cross‐correlation functions. If minimizaion is perfect, each of the system's outputs carries only one signal independent of the others. In these algorithms, the computation burden of the output cross‐correlation functions normally slows down the separation algorithm. This paper, describes a computationally efficient method for off‐line pre‐computation of the needed cross‐correlation functions. Explicit formulas have been derived for the output cross‐correlation functions in terms of the received input signals and the de‐coupling system parameters. Then, it is shown that signal separation amounts to the least‐squares solution of a system of linear equations describing these output cross‐correlation functions, evaluated over a batch of lags. Next, a fast RLS‐type adaptive algorithm is devised for on‐line signal separation. In this respect, an algorithm is derived for updating the de‐coupling parameters as data comes in. This update is achieved recursively, along the negative of the steepest descent directions of an objective cost function describing the output cross‐correlation functions over a batch of lags, subject to equal output power constraints. Illustrative examples are given to demonstrate the effectiveness of the proposed algorithms. Copyright © 2002 John Wiley & Sons, Ltd. |
