| Abstract: | In drug delivery systems that use silicone elastomers as a diffusion matrix for the active drug, it is common to crosslink the material by the hydrosilylation reaction. In this platinum‐catalyzed reaction, vinyl groups on a polymer add to the methyl siloxane hydride (MHS) groups on a low molecular mass crosslinker. With an excess of crosslinker, a fast curing is achieved and a fully crosslinked material is formed. Unreacted MHS groups were shown to remain in the elastomer after curing because of the excess crosslinker. In this work, a simple procedure was developed to eliminate the unreacted MHS groups from the final product. We found that storage of the product at +40°C and 75% relative humidity for a few weeks will effectively destroy the residual MHS groups in the elastomer. The effects of varying levels of humidity, oxygen, and temperature on this postcuring procedure were studied. The amount of MHS groups was measured with NMR and IR spectroscopy. We also found that the hardness of the material increased by approximately 25% as a consequence of this postcuring treatment. This increase is probably due to a secondary crosslinking reaction between MHS and silanol groups. Heat treatment at higher temperatures led to an even further increase in the hardness and compression modulus. Because no MHS groups remained in the elastomer when this heat treatment was started, it is apparent that another secondary crosslinking reaction is occurring, probably silanol condensation. © 2002 Wiley Periodicals, Inc. J Appl Polym Sci 84: 2254–2264, 2002 |
