首页 | 本学科首页   官方微博 | 高级检索  
     

科氏质量流量计模拟驱动方法研究
引用本文:徐科军,徐文福.科氏质量流量计模拟驱动方法研究[J].计量学报,2005,26(2):149-154.
作者姓名:徐科军  徐文福
作者单位:合肥工业大学自动化研究所,安徽,合肥,230009;合肥工业大学自动化研究所,安徽,合肥,230009
基金项目:高等学校骨干教师资助计划项目(教育部教技司[2000]65号)
摘    要:驱动系统是科里奥利质量流量计的重要组成部分之一。它为流量管提供驱动力,使流量管以其固有频率和稳定的振幅振动,并且能够跟随流量管固有频率的变化而变化。目前的驱动系统是基于模拟信号的工作方式。分析了这种驱动系统的工作原理,比较了各种波形的驱动信号,研究了几种驱动电路。

关 键 词:计量学  科里奥利质量流量计  驱动系统  模拟方式
文章编号:1000-1158(2005)02-0149-06
修稿时间:2002年10月28

Research on Analog Driving Methods of Coriolis Mass Flow Meter
XU Ke-jun,XU Wen-fu.Research on Analog Driving Methods of Coriolis Mass Flow Meter[J].Acta Metrologica Sinica,2005,26(2):149-154.
Authors:XU Ke-jun  XU Wen-fu
Abstract:The driving system is an important part of Coriolis mass flow meter. It supplies the driving force for flow pipes and makes flow tubes oscillate at their natural resonant frequency and the fixed amplitude. At the same time the oscillation frequency of the driving system can change with the natural resonant frequency of flow tubes. Now the driving system of Coriolis mass flow meter works in the mode of analog signal. The operation principle of the driving system is analyzed, various kinds of drive signals are compared and several kinds of drive circuits are studied.
Keywords:Metrology  Coriolis mass flow meter  Driving system  Analog mode
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号