| 硬质合金群钻钻削ZGMn13高锰钢干切削实验研究 |
| |
| 引用本文： | 许立,席岩.硬质合金群钻钻削ZGMn13高锰钢干切削实验研究[J].工具技术,2009,43(11):26-28. |
| |
| 作者姓名： | 许立 席岩 |
| |
| 作者单位： | 大连交通大学 |
| |
| 摘 要： | 高锰钢是一种典型的难加工材料，其特点是强度高、硬度高和耐磨性好，切削加工性差，主要是刀具耐用度和加工效率低。本文着重分析在干切削情况下钻削ZGMn13高锰钢，通过充分的理论分析和科学实验，对硬质合金群钻的几何参数与结构进行改进，为高锰钢的钻削加工提供了科学依据。
|
| 关 键 词： | ZGMn13高锰钢 硬质合金群钻 干切削 |
Experimental Research on Dry Cutting of Carbide Drill with Multi-facet for ZGMn13 High Manganese Steel |
| |
| Xu Li,Xi Yan.Experimental Research on Dry Cutting of Carbide Drill with Multi-facet for ZGMn13 High Manganese Steel[J].Tool Engineering(The Magazine for Cutting & Measuring Engineering),2009,43(11):26-28. |
| |
| Authors: | Xu Li Xi Yan |
| |
| Affiliation: | Xu Li,Xi Yan Master,Mechanical Engineering Department of Dalian Jiaotong University,Dalian,Liaoning116028,China |
| |
| Abstract: | High manganese steel is a typical of hard-machining material. It has the characteristic of high strength, hardness and good wearing ability, so it’s machining is poor, mostly because tool’s wearing and machining efficiency is very low. This article focuses on dry cutting for ZGMn13 high manganese steel and through plenary academic analysis and scientific experiments, to improve Carbide drill with Multi-facet on the geometric parameters and the structure. This provides scientific basis for the high manganese steel’s drilling. |
| |
| Keywords: | ZGMn13 high manganese steel carbide drill with multi-facet dry cutting |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
