| 预紧高速角接触球轴承运行刚度研究 |
| |
| 引用本文： | 刘俊峰,陈小安,合烨,陈宏,单文桃. 预紧高速角接触球轴承运行刚度研究[J]. 现代科学仪器, 2012, 0(3): 13-16 |
| |
| 作者姓名： | 刘俊峰 陈小安 合烨 陈宏 单文桃 |
| |
| 作者单位： | 重庆大学机械传动国家重点实验室,重庆,400044 |
| |
| 基金项目： | 国家自然科学基金(51005259);国家重点传动试验室访问学者基金项目(KFKT-200801);中央高校基本科研业务费资助(CDJXS11111143) |
| |
| 摘 要： | 基于滚动轴承拟静力学分析理论,从微观的角度探讨定位预紧下轴承内外圈位移存在约束时其内部的动力学状态;以B7004轴承为例,分析预紧方式对角接触球轴承运行刚度的影响,并利用电涡流位移传感器、LMS数据采集分析仪等仪器,在12MD60Y6型号电主轴上进行轴承刚度测试,对理论关系进行验证。结果表明:理论值能准确描述轴承运行刚度变化规律;定位预紧相比定压预紧更能提高轴承的支承刚度。
|
| 关 键 词： | 角接触球轴承 轴承运行刚度 定压预紧 刚度测试 |
Research on Operating Stiffness of High-speed Angular Contact Ball Bearings with Preload |
| |
| Liu Junfeng,Chen Xiaoan,HeYe,Chen Hong,Shan Wentao. Research on Operating Stiffness of High-speed Angular Contact Ball Bearings with Preload[J]. Modern Scientific Instruments, 2012, 0(3): 13-16 |
| |
| Authors: | Liu Junfeng Chen Xiaoan HeYe Chen Hong Shan Wentao |
| |
| Affiliation: | (The State Key Laboratory of Mechanical Transmission,Chongqing University,Chongqing,400044,China) |
| |
| Abstract: | Based on the pseudo statics analysis theory of the bearing,the internal dynamic states of the bearing under lock-ring preload,which the displacements of the inner and outer rings are constrained,are discussed from microcosmic aspect.Taking B7004 bearing as an example,effect of preload methods on operating stiffness of the angular contact ball bearing was analyzed.To verify the theoretical model,a bearing stiffness test was carried out on the 12MD60Y6 motorized spindle,in which the eddy current sensors and LMS data collector & analyzer were utilized.The results indicated that thearetical values are able to reflect the change law of the bearing operating stiffness.Compared with constant preload,lock-ring preload has better performance on the support stiffness of the bearing. |
| |
| Keywords: | Angular Contact Ball Bearings Bearing operating stiffness Lock-ring preload Stiffness test |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
