首页 | 本学科首页   官方微博 | 高级检索  
     

原子吸收光谱法测定TG6钛合金中痕量铁不确定度的分析
引用本文:任慧,朱艳荣,任懿. 原子吸收光谱法测定TG6钛合金中痕量铁不确定度的分析[J]. 现代科学仪器, 2012, 0(3): 94-97
作者姓名:任慧  朱艳荣  任懿
作者单位:1. 中航工业北京航空材料研究院/中航(试金石)检测科技有限公司,北京,100095
2. 中航工业天水飞机工业有限责任公司,天水,741025
摘    要:通过对原子吸收光谱法测定TG6钛合金中痕量铁的不确定度的系统分析,阐述了测量结果不确定度主要来源于测量试液中铁的浓度、试液定容体积及样品质量产生的不确定度,并对这些分量进行了量化计算,最后计算出合成标准不确定度和扩展不确定度。同时通过评估,得出影响铁含量测定不确定度的主要因素是测量试液中铁浓度引起的不确定度。

关 键 词:原子吸收光谱法  TG6钛合金    不确定度

Analysis of the Uncertainty for the Determination of Trace Iron in TG6 Titanium Alloy by AAS
Ren Hui,Zhu Yanrong,Ren Yi. Analysis of the Uncertainty for the Determination of Trace Iron in TG6 Titanium Alloy by AAS[J]. Modern Scientific Instruments, 2012, 0(3): 94-97
Authors:Ren Hui  Zhu Yanrong  Ren Yi
Affiliation:1AVIC Beijing Institute of Aeronautical Materials/AVIC Testing Innovation Copperation,Beijing 100095, 2Tianshui Aircraft Industrial Corporation of AVIC,Tianshui 741025)
Abstract:The uncertainty for the determination of trace Fe in TG6 titanium alloy by AAS was analyzed.The sources of the uncertainty resulted from the determination of Fe concentration in the solution,the volume of the solution and the weight of the sample were discussed and calculated.At last the combined standard uncertainty and the expanded uncertainty were reported.At the same time,through evaluation,it was indicated that the primary factor affecting the uncertainty for the determination of Fe is the uncertainty of Fe concentration in the solution.
Keywords:AAS  TG6 titanium  Iron  Uncertainty
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号