Abstract: | The present work proposes an unusual method for controlling the activation of the switches of switching mode oscillators. The proposed method is in fact a tool for developing switching mode oscillators that are controlled by full variable feedback. The methods developed in the present article rely on characterizing the switching procedure by intentionally moulding the related switching line (the switching line is the line in the state space, where the switches change polarity). The switching line in most of the switching mode oscillators is relatively simple. For example, in many cases the switch changes state in accordance with the output current sign. Hence, the line ‘output current’ is zero, is the switching line in this case. Relatively many advantages are attained by the present moulding of the switching line. For example, oscillators that oscillate even with very low‐quality factor (large load) are obtainable. The proposed method enables a simple way for controlling the output voltage and the frequency of the switching mode oscillator. Furthermore, current limiter property of the oscillator output can be obtained by the method, even in cases where the original oscillator is inherently a voltage source. The output impedance is also made controllable by the method. The successfully improved characteristics are demonstrated by investigating a particular structure, namely, a switching mode series resonant oscillator. Copyright © 2000 John Wiley & Sons, Ltd. |