首页 | 本学科首页   官方微博 | 高级检索  
     

直升机视景仿真及座舱仪表显示系统实现
引用本文:邱岳恒,卢京潮,刘秉. 直升机视景仿真及座舱仪表显示系统实现[J]. 测控技术, 2010, 29(7): 13-15
作者姓名:邱岳恒  卢京潮  刘秉
作者单位:西北工业大学,自动化学院,陕西,西安,710129;西北工业大学,自动化学院,陕西,西安,710129;西北工业大学,自动化学院,陕西,西安,710129
摘    要:以开发一套直升机飞行视景仿真系统为目的,提出了一种基于Multigen Creator和Vega软件的三维视景仿真系统解决方案.利用三维图形开发软件Creator对座舱仪表模型进行可视化建模,使用自由度设置(DOF)技术实现仪表指针的动态交互.将模型加载到Vega的环境中,在VC++环境下,基于MFC实现了仪表的驱动程序,给出了具体的实现方法,设计了座舱仪表仿真界面.最后在Vega场景中仿真直升机的飞行状态,直观形象地反映直升机的飞行特性.实际仿真显示,该视是景系统的仿真效果形象逼真,令人满意.

关 键 词:直升机  三维视景仿真  座舱仪表  仿真界面

Implementation of Helicopter Cockpit Instruments Display and Visual Simulation System
QIU Yue-heng,LU Jing-chao,LIU Bing. Implementation of Helicopter Cockpit Instruments Display and Visual Simulation System[J]. Measurement & Control Technology, 2010, 29(7): 13-15
Authors:QIU Yue-heng  LU Jing-chao  LIU Bing
Affiliation:QIU Yue-heng,LU Jing-chao,LIU Bing(School of Automation,Northwestern Polytechnical University,Xi'an 710129,China)
Abstract:A scheme to develop a three-dimensional visual simulation system of helicopter is presented and accomplished based on the software Multigen Creator/Vega.The visualized models of cockpit instruments are created with the modeling software creator.The DOF technology is used for coordinating the behaviors of the instruments.The models are loaded to the Vega and the device driver is developed by using MFC under VC environment.The method is presented and the simulation interface is designed.Finally,the visual simulation under the Vega environment faithfully reflects the state of the helicopter.The simulation results show that the performance is vivid and satisfying.
Keywords:helicopter  three dimensional visual simulation  cockpit instruments  simulation interface
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《测控技术》浏览原始摘要信息
点击此处可从《测控技术》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号