| 石油钻杆管端加厚工艺过程设计与试验 |
| |
| 引用本文： | 裴志强,权晓惠,徐能慧,董晓娟. 石油钻杆管端加厚工艺过程设计与试验[J]. 钢管, 2002, 31(4): 17-21 |
| |
| 作者姓名： | 裴志强 权晓惠 徐能慧 董晓娟 |
| |
| 作者单位： | 西安重型机械研究所,陕西西安,710032 |
| |
| 摘 要： | 简介了Φ88.9mm(3.5in)石油钻杆管端加厚工艺过程设计,试验的条件、工艺,模具设计、试验过程及检验,分析了试验结果,得出了工艺可行、试验成功的结论。
|
| 关 键 词： | 石油钻杆 管端加厚 工艺 试验 |
| 文章编号： | 1001-2311(2002)04-0017-05 |
| 修稿时间： | 2001-03-26 |
Design and Testing of Technological Process for End-upsetting of Oil Drill Pipe |
| |
| Pei Zhiqiang,Quan Xiaohui,Xu Nenghui,Dong Xiaojuan. Design and Testing of Technological Process for End-upsetting of Oil Drill Pipe[J]. Steel Pipe, 2002, 31(4): 17-21 |
| |
| Authors: | Pei Zhiqiang Quan Xiaohui Xu Nenghui Dong Xiaojuan |
| |
| Abstract: | A brief on the technology of end-upsetting of the Φ88.9mm(3.5in) oil drill pipe is presented in the paper, covering such aspects as process design, testing conditions, die design and testing/inspection processes. The analysis of the test result shows that the technological process is feasible, and the test is successful. |
| |
| Keywords: | Oil drill pipe End-upsetting Technology Testing |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
