| 薄壁易变形零件的夹具设计与改进 |
| |
| 引用本文： | 葛菊英,姚建方.薄壁易变形零件的夹具设计与改进[J].机械工程师,2010(12):106-107. |
| |
| 作者姓名： | 葛菊英 姚建方 |
| |
| 作者单位： | [1]南京铁道职业技术学院苏州校区,江苏苏州215137 [2]苏州大智精密有限公司,江苏苏州215137 |
| |
| 摘 要： | 通过对薄壁易变形零件的夹具设计,解决了薄壁零件的加工变形问题,并针对使用中出现的问题进行改进,大大提高了工作效率,降低了人工成本。
|
| 关 键 词： | 薄壁零件 夹具设计 装夹变形 夹具改进 |
Design and Improve Clamps of Easy-deform Thin-wall Part |
| |
| GE Ju-ying,YAO Jian-fang.Design and Improve Clamps of Easy-deform Thin-wall Part[J].Mechanical Engineer,2010(12):106-107. |
| |
| Authors: | GE Ju-ying YAO Jian-fang |
| |
| Affiliation: | 1.Nanjing Institute of Railway Technology, Suzhou 215137,China; 2.Suzhou Dachi Precision Technology Co., Ltd, Suzhou 215137,China) |
| |
| Abstract: | Resolve the process deform of thin-wall part problem by design the clamps of easy-deform thin-wall part, also improve it aimed at the problem appear in the using process. Advanced the work efficiency greatly, reduce the labour cost. |
| |
| Keywords: | thin-wall part clamps design deform of clamp clamps improve |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
