| 预制混凝土板对组合剪力墙抗剪静力性能的影响 |
| |
| 引用本文： | 张素梅,吴志坚,马欣伯. 预制混凝土板对组合剪力墙抗剪静力性能的影响[J]. 长安大学学报(建筑与环境科学版), 2008, 0(1): 18-22 |
| |
| 作者姓名： | 张素梅 吴志坚 马欣伯 |
| |
| 作者单位： | 哈尔滨工业大学土木工程学院,黑龙江哈尔滨150090 |
| |
| 基金项目： | 国家自然科学基金项目（50478029） |
| |
| 摘 要： | 采用ANSYS软件分析了预制混凝土板厚度和混凝土强度对钢板混凝土组合剪力墙承载力及初始剪切刚度的影响，通过与钢板剪力墙对比，探讨了钢板混凝土组合剪力墙的受力机理和破坏模式。研究结果表明：与钢板剪力墙相比，预制混凝土板能够有效地抑制钢板屈曲，明显地提高钢板混凝土组合剪力墙抗剪承载力及初始剪切刚度，钢板的受力形式也发生了明显的变化。
|
| 关 键 词： | 预制混凝土板 静力性能 有限元分析 组合剪力墙 屈曲 |
Influence of Precast Concrete-plate on Static Behavior of Steel-concrete Composite Shear Wall |
| |
| ZHANG Su-mei,WU Zhi-jian,MA Xin-bo. Influence of Precast Concrete-plate on Static Behavior of Steel-concrete Composite Shear Wall[J]. Journal of Northwestern Institute of Architectural Engineering, 2008, 0(1): 18-22 |
| |
| Authors: | ZHANG Su-mei WU Zhi-jian MA Xin-bo |
| |
| Affiliation: | (School of Civil Engineering, Harbin Institute of Technology, Harbin 150090, Heilongjiang, China) |
| |
| Abstract: | The commercial software ANSYS was employed to investigate the mechanical behavior of steel-concrete composite shear wall （SCSW） under mono-static load. The influences of concrete-plate thickness and concrete strength on SCSW ultimate bearing capacity and SCSW initial shear stiffness were discussed in detail after comparison of the mechanical behavior of the two types of shear walls. The research results show that concrete-plate thickness is a key parameter to predict the behavior of SCSW, and variation of concrete grade has little effect on static behavior of SCSW. |
| |
| Keywords: | precast concrete-plate static behavior finite element analysis composite shear wallbuckling |
| 本文献已被 维普 等数据库收录！ |
