Biodiesel from canola oil using a 1 : 1 molar mixture of methanol and ethanol

Canola oil was transesterified using a 1 : 1 molar mixture of methanol and ethanol (M/E) with potassium hydroxide (KOH) catalyst. The effects of catalyst concentration (0.5–1.5 wt‐%), molar ratio of M/E to canola oil (3 : 1 to 20 : 1) and reaction temperature (25–75 °C) on the percentage yield measured after 2.5 and 5.0 min were optimized using a central composite design. A maximum percentage yield of 98% was obtained for a catalyst concentration of 1.1 wt‐% and an M/E to canola oil molar ratio of 20 : 1 at 25 °C at 2.5 min, whereas a maximum percentage yield of 99% was obtained for a catalyst concentration of 1.15 wt‐% and all molar ratios of reactants at 25 °C at 5 min. Statistical analysis demonstrated that increasing catalyst concentration and molar ratio of reactants resulted in curvilinear and linear trends in percentage yield, both at 2.5 and 5 min. However, reaction temperature, which affected the percentage yield at 2.5 min linearly, was insignificant at 5 min. The resultant mixed methyl/ethyl canola esters exhibited enhanced low‐temperature performance and lubricity properties in comparison to neat canola oil methyl esters and also satisfied ASTM D6751 and EN 14214 standards with respect to oxidation stability, kinematic viscosity, and acid value.