Additive effect of poly(ethylene oxide) on polypropylene/fibrous cellulose composite: Effects of additive amount of poly(ethylene oxide) on Young's modulus and morphology

In this work, the additive effects of the poly(ethylene oxide) (PEO) on the Young's moduli of two kinds of polypropylene (PP)/fibrous cellulose (FC) composite were studied using the Kerner–Nielsen equation. In the case of the PP/maleated PP (MAPP)/FC + PEO composite, all the values of the moduli with the various PEO contents were in good agreement with the theoretical values obtained from the Kerner–Nielsen equation. Whereas the moduli of the PEO/FC + PP/MAPP composite followed the Kerner–Nielsen equation about 6 vol % of the PEO content and then unexpectedly deviated. In the scanning electron microscopy (SEM) observation, the PP/MAPP/FC + PEO composite was found to have a sea‐island morphology corresponding to the PP/MAPP/FC matrix and the PEO phase. This morphology had been unchanged against the increase of the PEO content. Whereas in the case of the PEO/FC + PP/MAPP composite, the SEM micrographs showed that that the interface between the FC and the PP became worse with the increase of the PEO content, indicating that the formation of the PP/MAPP/FC matrix was blocked by the excess PEO. The deviation of the Young's moduli from the Kerner–Nielsen equation was due to the blocking of the PEO. It was found that the adequate combination of the PEO and the MAPP was able to supply the increase of the toughness of the PP/FC composite by investigating the dependence of the PEO/FC + PP/MAPP composite on the MAPP content. © 2009 Wiley Periodicals, Inc. J Appl Polym Sci, 2009