| 核电厂汽轮发电机组轴承振动高分析与处理 |
| |
| 引用本文： | 贾凯利,黄前进,蔡勇军. 核电厂汽轮发电机组轴承振动高分析与处理[J]. 发电设备, 2020, 0(2): 124-128 |
| |
| 作者姓名： | 贾凯利 黄前进 蔡勇军 |
| |
| 作者单位： | 中广核核电运营有限公司;大亚湾核电运营管理有限责任公司 |
| |
| 摘 要： | 针对某核电厂2号汽轮发电机组大修后开机过程中11号轴承振动高接近打闸值,通过全面振动故障诊断分析,提出振动最可能的原因为励磁机套装靠背轮松动。检查发现套装靠背轮有一定瓢偏且连接螺栓紧力不均匀,针对这两种异常现象可能引起振动的机理进行了深入的分析和计算,最终得出靠背轮松动是根本原因;更换励磁机转子,重新开机后振动恢复正常。
|
| 关 键 词： | 核电厂 轴承振动 套装靠背轮 靠背轮螺栓 紧力不均 |
Analysis and Treatment on High Shaft Vibration of a Turbo-Generator Set in Nuclear Power Station |
| |
| Jia Kaili,Huang Qianjin,Cai Yongjun. Analysis and Treatment on High Shaft Vibration of a Turbo-Generator Set in Nuclear Power Station[J]. Power Equipment, 2020, 0(2): 124-128 |
| |
| Authors: | Jia Kaili Huang Qianjin Cai Yongjun |
| |
| Affiliation: | (China Nuclear Power Operations Co., Ltd., Shenzhen 518124, Guangdong Province, China;Daya Bay Nuclear Power Operations and Management Co., Ltd., Shenzhen 518124,Guangdong Province, China) |
| |
| Abstract: | To solve the problem of high vibration that approaches the trip value encountered by shaft 11 in No.2 turbo-generator set of a nuclear power plant during startup after overhaul,fault diagnosis was conducted,based on which,the most possible cause was believed to be the loosened shrunk coupling.Two abnormities were found in the subsequent examinations,such as the deflected coupling and the unevenly tightened connection bolts,and the root cause of the failure was determined to be the loosened shrunk coupling by means of further analysis and calculation on the vibration mechanism that may be resulted from the two abnormities.The problem was finally solved by replacing the exciter rotor. |
| |
| Keywords: | nuclear power plant shaft vibration shrunk coupling coupling bolt uneven tightness |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
