首页 | 本学科首页   官方微博 | 高级检索  
     

大型汽轮发电机转子系统的模态分析与仿真
引用本文:魏忠轩,王益轩,于永积,陈旭.大型汽轮发电机转子系统的模态分析与仿真[J].纺织高校基础科学学报,2012,25(2):217-221.
作者姓名:魏忠轩  王益轩  于永积  陈旭
作者单位:西安工程大学机电工程学院,陕西西安,710048
基金项目:陕西省教育厅科技攻关项目
摘    要:运用有限元分析软件ANSYS对转轴系统的模态进行分析,并运用三维软件Pro/E的NC加工功能实现对转子的数控加工,得到前20阶频率.计算出汽轮发电机转子弯曲振动的固有频率,得到临界转速位于第二、三阶临界转速之间,避免工作转速与临界转速相同产生的共振现象,达到优化转子动力特性的目的.利用三维软件PRO/E的加工仿真功能实现了转轴车削加工和铣削加工的模拟,为实际转子模型的NC加工奠定了基础.

关 键 词:汽轮发电机  转子  有限元分析  数控加工与仿真

Research on virtual prototyping of rotor system of large steam turbine-generator
WEI Zhong-xuan , WANG Yi-xuan , YU Yong-ji , CHEN Xu.Research on virtual prototyping of rotor system of large steam turbine-generator[J].Basic Sciences Journal of Textile Universities,2012,25(2):217-221.
Authors:WEI Zhong-xuan  WANG Yi-xuan  YU Yong-ji  CHEN Xu
Affiliation:(School of Mechanical Engineering,Xi′an Polytechnic University,710048,China)
Abstract:In order to obtain the steam turbine generator rotor inherent frequency,the critical speed and numerical control processing method,3-D software Pro/E of NC machining function and the finite element analysis software ANSYS are used to the steam turbine generator rotor bending vibration of natural frequencies and critical speed were calculated by the 20 order frequency,so as to avoid the critical speed work the same produce resonance phenomenon,achieve the optimized rotor dynamic characteristics of the target.PRO/E processing simulation function was used to realize the shaft turning processing and milling simulation,the actual rotor model for NC machining the necessary basic lay.
Keywords:stcan turbsre generator  rotor  finite element analysis  numerical control processing and simulation
本文献已被 CNKI 维普 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号