| 位移型消能减震偏心结构Pushover能力谱简化计算方法 |
| |
| 引用本文： | 李钢,李宏男. 位移型消能减震偏心结构Pushover能力谱简化计算方法[J]. 工程力学, 2008, 25(3): 49-57 |
| |
| 作者姓名： | 李钢 李宏男 |
| |
| 作者单位： | 大连理工大学海岸及近海工程国家重点实验室,辽宁,大连,116023;大连理工大学海岸及近海工程国家重点实验室,辽宁,大连,116023 |
| |
| 基金项目： | 辽宁省大连市建委科技基金 |
| |
| 摘 要： | 该文提出了一种计算位移型消能减震偏心结构能力谱的简化计算方法,通过结构变形分解,将偏心结构的能力谱曲线分解为平面Pushover能力谱及非偏心结构的纯扭转能力谱,并采用位移合成的方法得到最终的能力谱曲线。数值算例与有限元软件Sap2000分析结果进行对比,结果表明:该文提出的方法与有限元软件计算结果接近,是一种有效的简化计算方法。
|
| 关 键 词： | 抗震设计 减震装置 偏心结构 推覆分析 能力谱 |
| 文章编号： | 1000-4750(2008)03-0049-09 |
| 修稿时间： | 2006-08-21 |
DIRECT DISPLACEMENT-BASED DESIGN FOR BUILDINGS WITH PASSIVE ENERGY DISSIPATION DEVICES |
| |
| LI Gang,LI Hong-nan. DIRECT DISPLACEMENT-BASED DESIGN FOR BUILDINGS WITH PASSIVE ENERGY DISSIPATION DEVICES[J]. Engineering Mechanics, 2008, 25(3): 49-57 |
| |
| Authors: | LI Gang LI Hong-nan |
| |
| Abstract: | A simple method for calculating pushover curves of asymmetric structure with displacement- dissipative devices is presented. The calculated progress of this method is carried out throughout decomposing the shaped structure to translation and torsion ones. The pushover curves of asymmetric structure with displacement-dissipative devices are formed by integrating the two curves. Numerical example result calculated by simple method was compared with that obtained by software Sap2000. The comparison shows that the simple method can provide an approving procession for engineering analysis. |
| |
| Keywords: | seismic design dissipative device asymmetric structure Pushover method energy spectrum |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
