Synthesis of cyclic carbonates from epoxides: Use of reticular oxygen of Al2O3 or Al2O3-supported CeOx for the selective epoxidation of propene

Reticular oxygen of Al₂O₃ or CeO_x supported on Al₂O₃ was used for the epoxidation of propene without any double bond cleavage. In batch reaction, Al₂O₃ alone was able to convert propene into propene oxide (PO) with 100% selectivity and 2% conversion of propene with a close to 3:1 ratio with respect to the number of Al(III) reduced to elemental Al. When Ce₂O₃/Al₂O₃ or CeO₂/Al₂O₃ was used, Al remained in its +3 oxidation state, while the Ce oxide was the oxidant as demonstrated by XPS analyses. CeO_x/Al₂O₃ was more active (propene conversion yield of 4–5%) but the selectivity was lower (70%) as PO was isomerized into acetone and propionaldehyde.

Interestingly the use of reticular oxygen very much improves the selectivity with respect to the use of pure O₂. In fact, while propene was more efficiently oxidized (10%) with O₂ in presence of Al₂O₃ or CeO_x/Al₂O₃, the selectivity was as low as 40% because C1 and C2 products were formed. However, the use of reticular oxygen represents a selective two-step technique for the use of molecular oxygen as oxidant of propene. The used oxides can be re-oxidized and the whole process can be further improved towards higher yields.

PO is quantitatively converted into propene carbonate by reaction with CO₂ in presence of Nb₂O₅.