Pairing effect and tensile properties of laminated high-performance hybrid composites prepared using carbon/glass and carbon/aramid fibers |
| |
| Affiliation: | 1. Advanced Fibro-Science, Kyoto Institute of Technology, Kyoto 6068585, Japan;2. College of Textiles, Donghua University, Shanghai 201620, PR China;3. Shanghai Key Laboratory of Advanced Micro & Nano Textile Materials, Shanghai 201620, PR China;4. Maruhachi Corporation, Fukui 9100276, Japan;1. School of Mechanical Engineering, KIIT, Deemed to be University, Bhubaneswar - 751024, Odisha, India;2. Department of Materials and Metallurgical Engineering, Maulana Azad National Institute of Technology, Bhopal - 462003, India;1. School of Textile Science and Engineering, Tiangong University, Tianjin 300387, China;2. Tianjin and Ministry of Education Key Laboratory for Advanced Textile Composite Materials, Tiangong University, Tianjin 300387, China;3. Institute for NanoScale Science and Technology, College of Science and Engineering, Flinders University, South Australia 5042, Australia;4. Laboratory of Fiber Application and Manufacturing, Department of Fiber and Composite Materials, Feng Chia University, Taiwan 40724, China |
| |
| Abstract: | Many attempts have been made to fabricate lightweight, high-performance, and low-cost polymeric composites. To improve the mechanical performance of the same material compared to conventional composites, paired hybrid materials were manufactured with different lamination structures. Each of six types of hybrid composite was designed by lamination pairing of carbon/aramid fabric and carbon/glass fabric using VARTM. The dependence of the mechanical properties of the samples on the pairing effects of the lamination structures was investigated. All pairing materials did not lead to a large increase of tensile strength due to the domination of carbon fiber, but the mechanical properties of specific laminates were clearly changed by the particular pairing sequence used. Using the limited material, the design of an effective structure was the central laminating condition with a good tensile and bending properties. Laminating position of the carbon fiber was found to play an important role in the stacking design of hybrid composites. |
| |
| Keywords: | A. Polymer-matrix composites (PMCs) B. Mechanical properties D. Mechanical testing E. Resin transfer moulding (RTM) |
| 本文献已被 ScienceDirect 等数据库收录！ |
|
