Fabrication and characterization of three dimensional woven carbon fiber/silica ceramic matrix composites

Carbon fiber reinforced fused silica composites exhibit the advantages of excellent mechanical properties, high heat resistance, low thermal expansion and low density, but low impact resistance or toughness. A novel modified slurry impregnation and hot pressing (SIHP) method was adopted to fabricate a new type of three dimensional orthogonal woven structure carbon fiber reinforced silica ceramic matrix composites (3D Cf/SiO₂ CMCs) with higher density and lower porosity. Physical characterization, flexural behavior, impact performance and toughening mechanism of the composites were investigated by three-point bending tests, impact tests, and scanning electron microscopy analysis. The 3D Cf/SiO₂ CMC showed a higher flexural strength in both warp (201.6%) and weft (263.6%) directions than those of pure SiO₂ and failed at a non-brittle mode due to the fiber debonding and pullout, and a delaminated failure of the 3D preform. The maximum impact energy absorption of the 3D Cf/SiO₂ CMC was 96.9 kJ/m², almost 4 times as much as those for typical other carbon fiber reinforced CMCs.