| 起重机生产企业技术部门信息化架构探讨 |
| |
| 引用本文： | 杨翔,丁文捷. 起重机生产企业技术部门信息化架构探讨[J]. 宁夏工程技术, 2009, 8(2): 124-127 |
| |
| 作者姓名： | 杨翔 丁文捷 |
| |
| 作者单位： | 宁夏大学,物理电气信息学院,宁夏,银川,750021;宁夏大学机械工程学院,宁夏,银川,750021 |
| |
| 基金项目： | 宁夏回族自治区科技攻关计划基金，银川市科技开发计划基金 |
| |
| 摘 要： | 为全方位地提高起重机生产企业技术部门设计产品的自动化、数字化程度，摆脱传统二维设计，转向新式三维设计，在分析银川起重机器股份有限公司技术部门现状的基础上，归纳总结了支撑新式三维设计的3个主要的信息化应用模式，即系列化产品设计、创新产品设计、产品数据管理．因为前2个方面依赖于后一个，因此设计了以产品数据管理为基础的系列化产品设计和创新产品设计流程．实践表明，系列化产品设计流程提高了产品设计自动化程度，且创新产品设计流程提高了设计数字化程度．最后在此基础上，探讨了实现这2个流程的信息化架构．
|
| 关 键 词： | 技术部门 信息化架构 系列化产品设计 创新产品设计 产品数据管理 |
Informatization architecture discuss on the R&D department of crane manufacturers |
| |
| YANG Xiang,DING Wenjie. Informatization architecture discuss on the R&D department of crane manufacturers[J]. Ningxia Engineering Technology, 2009, 8(2): 124-127 |
| |
| Authors: | YANG Xiang DING Wenjie |
| |
| Affiliation: | 1.School of Physics ＆ Electrical Information, Ningxia University, Yinehuan 750021, China; 2.School of Mechanical Engineering, Ningxia University, Yinehuan 750021,China) |
| |
| Abstract: | The R＆D Department of Crane Manufacturer is emerging from the traditional 2D design, turning to the new 3D design. It will be an all-round way to improve the degree of automation and digitization of products design. With the analysis status quo of R＆D conditions of Yinchuan Crane and Machine Co., Ltd., three main informatization pattern to support new 3D design is concluded and summarized, i.e., serial product design, innovative product design, and PDM. As the two aspects of the former depended on the latter one, PDM-based serial product and innovation product design flows were given. Serial product design flow improves the degree of automation, while innovation product flow improves the degree of digitization. Finally, the implementing of the two flows in informatization architecture was discussed. |
| |
| Keywords: | R＆D department infonnization architecture serial product design innovative product design PDM |
| 本文献已被 维普 万方数据 等数据库收录！ |
|
