| 提高微细电解加工精度的研究 |
| |
| 引用本文： | 王明环,朱荻,徐惠宇. 提高微细电解加工精度的研究[J]. 电加工与模具, 2005, 0(3): 30-32,36 |
| |
| 作者姓名： | 王明环 朱荻 徐惠宇 |
| |
| 作者单位： | 南京航空航天大学机电学院,南京,210016 |
| |
| 摘 要： | 对影响微细电解加工精度的因素进行了详细的分析，提出了改善加工精度的方法，如以循环进刀代替直接进刀方式、采用脉冲加工电源、改善阴极的结构设计以及采用非线性电解液等。最后，结合实验对这些方法的可行性与有效性进行了验证。
|
| 关 键 词： | 微细电解加工 加工精度 平衡间隙 |
Research of Improving the Precision of Micro-ECM |
| |
| Wang Minghuan,ZHU Di,Xu Huiyu. Research of Improving the Precision of Micro-ECM[J]. Electromachining & Mould, 2005, 0(3): 30-32,36 |
| |
| Authors: | Wang Minghuan ZHU Di Xu Huiyu |
| |
| Abstract: | The paper discussed clearly the reasons of affecting t he precision of Micro-ECM. Measures were brought forward to improve the precision, such as peri o dically feeding replacing directly feeding, using pulse power, changing the desi gn of cathode and using nonlinear electrolyte etc. Finally, experiments were car ried on to prove the feasibility and validity of the ways. |
| |
| Keywords: | Micro-ECM process precision equilibrium gap |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
