| 不同方式引入BZB制备低温烧结的Ba2Ti9O20陶瓷 |
| |
| 引用本文： | 金彪,汪潇,?盍羲?.不同方式引入BZB制备低温烧结的Ba2Ti9O20陶瓷[J].硅酸盐通报,2017,36(4):1187-1192. |
| |
| 作者姓名： | 金彪 汪潇 ?盍羲? |
| |
| 作者单位： | 河南城建学院材料与化工学院,平顶山,467036;河南城建学院材料与化工学院,平顶山 467036;河南科技大学材料科学与工程学院,洛阳 471003 |
| |
| 摘 要： | 以BaCO3和TiO2粉末为原料,采用传统固相反应法制备Ba2Ti9O20陶瓷.以BiCl3、Zn(NO3)2 、H3BO3溶液为前驱液,通过液相法引入Bi2O3-ZnO-B2O3(BZB)助烧剂以降低Ba2Ti9O20陶瓷的烧结温度代替直接混合Ba2Ti9O20和BZB粉末.结果表明,液相法引入0.3 mol/L BZB溶液,1150 ℃烧结3 h所得Ba2Ti9O20陶瓷介电性能最佳(εr=37,Qf=23485 GHz),优越于固相混合法所得最佳介电性能(εr=34, Qf=16985 GHz).
|
| 关 键 词： | 微波介质陶瓷 固相反应 介电性能 低温烧结 |
Preparation of Low-temperature Sintered Ba2Ti9O20 Ceramics Doped with BZB by Different Ways |
| |
| JIN Biao,WANG Xiao,YANG Liu-shuan.Preparation of Low-temperature Sintered Ba2Ti9O20 Ceramics Doped with BZB by Different Ways[J].Bulletin of the Chinese Ceramic Society,2017,36(4):1187-1192. |
| |
| Authors: | JIN Biao WANG Xiao YANG Liu-shuan |
| |
| Abstract: | Ba2Ti9O20 ceramics were synthesized by the traditional solid-state reaction method, using BaCO3 and TiO2 as raw materials.In order to reduce the sintering temperature of Ba2Ti9O20 ceramics, liquid-phase method was used to dope Bi2O3-ZnO-B2O3(BZB) by precursor solution (BiCl3,Zn(NO3)2 and H3BO3) instead of mixing BZB powder directly with Ba2Ti9O20 ceramics.The optimal concentration of BZB was found to be 0.3 mol/L, and the derived Ba2Ti9O20 ceramic sintered at 1150 ℃ for 3 h presented good microwave dielectric properties of εr=37 and Qf=23485 GHz, which is much better than those of mixing BZB powder directly with Ba2Ti9O20 ceramics(εr=34 and Qf=16985 GHz). |
| |
| Keywords: | microwave dielectric ceramics solid state reaction dielectric property low-temperature sintered |
|
| 点击此处可从《硅酸盐通报》浏览原始摘要信息 |
|
点击此处可从《硅酸盐通报》下载全文 |
|
