| 基于综合平衡法的注塑工艺参数多目标优化设计 |
| |
| 引用本文： | 林权. 基于综合平衡法的注塑工艺参数多目标优化设计[J]. 塑料科技, 2011, 39(1) |
| |
| 作者姓名： | 林权 |
| |
| 作者单位： | 武夷学院,福建武夷山,354300 |
| |
| 摘 要： | 结合正交试验法和模流分析软件Moldflow,对不同工艺条件下的汽车轮轴盖塑件成型过程进行模拟分析,运用多目标综合平衡法,对塑件成型后的体积收缩率、翘曲变形量和表面气穴3个目标值进行综合评判。通过对各成型工艺参数的极差分析和方差分析,确定熔体温度、模具温度、保压压力、冷却时间等注塑工艺参数对目标值的影响程度分,析得出最优的注塑工艺参数组合方案。生产实践证明塑件质量得到了有效的改善。
|
| 关 键 词： | 注塑成型 数值模拟 正交试验 综合平衡法 多目标优化 |
Optimized Design of Injection Molding Processing Parameters for Multi-object Based on Integral Balance Method |
| |
| Lin Quan. Optimized Design of Injection Molding Processing Parameters for Multi-object Based on Integral Balance Method[J]. Plastics Science and Technology, 2011, 39(1) |
| |
| Authors: | Lin Quan |
| |
| Affiliation: | Lin Quan-Wuyi University,Wuyishan 354300,China |
| |
| Abstract: | The injection molding process of automobile wheel axle cover under different processing technologies was simulated by orthogonal experiment and Moldflow software.The comprehensive evaluation to volume shrinkage rate,warp and surface cavitation of the molded part was obtained by multi-objective integral balance method.The effects of melt temperature,mold temperature,holding pressure and cooling time on objective values were determined by range analysis and variance analysis of the processing parameters,and t... |
| |
| Keywords: | Injection molding Numerical simulation Orthogonal experiment Integral balance method Multi-objective optimization |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
