| 不锈钢膜过滤油田采出水的影响因素分析 |
| |
| 引用本文： | 董健. 不锈钢膜过滤油田采出水的影响因素分析[J]. 广东化工, 2011, 38(10): 30-31,40 |
| |
| 作者姓名： | 董健 |
| |
| 作者单位： | 胜利油田胜利勘察设计研究院,山东东营,257026 |
| |
| 摘 要： | 试验讨论了不锈钢膜过滤油田采出水的主要影响因素及变化规律,得到的结论如下：0.5μm孔径不锈钢膜的出水水质能达到油田注水水质的A2级标准,确定不锈钢膜微滤采出水过程中较为合理的运行参数为操作压差0.10～0.15 MPa,膜面流速2.5～3.5 m/s,来液温度40～50℃。
|
| 关 键 词： | 不锈钢膜 微滤 油田采出水 参数优化 |
Studies on Influencing Factors of Stainless Steel Membrane Filtration for Oilfield Waste Water Treatment |
| |
| Dong Jian. Studies on Influencing Factors of Stainless Steel Membrane Filtration for Oilfield Waste Water Treatment[J]. Guangdong Chemical Industry, 2011, 38(10): 30-31,40 |
| |
| Authors: | Dong Jian |
| |
| Affiliation: | Dong Jian(Shengli Engineering Design& Consultation Co.,Ltd.,Shengli OilField,Dongying 257026,China) |
| |
| Abstract: | In the paper,the important reason and developing tendency were analyzed through the experiment research.Some conclusions from the stainless steel membrane experiment are as follows： that the permeate flow can meet the A2 reinjection standard,the optimum operating conditions are a trans-membrane pressures between 0.10~0.15 MPa,a crossflow velocities between 2.5~3.5 m·s-1 and a feed temperature between 40~50 ℃,under which the perfect permeate flux and operation effect can be gained. |
| |
| Keywords: | stainless steel membrane micro filtration oilfield waste water parameter optimization |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
