| 钛合金薄壁件车削加工的研究 |
| |
| 引用本文： | 张桂木,杨玉海,赵树国,郭建烨. 钛合金薄壁件车削加工的研究[J]. 机械设计与制造, 2006, 0(1): 140-141 |
| |
| 作者姓名： | 张桂木 杨玉海 赵树国 郭建烨 |
| |
| 作者单位： | 沈阳航空工业学院,沈阳,110034 |
| |
| 摘 要： | 传统的钛合金车削加工因其切削速度低,刀具耐用度低,加工质量难于控制,导致加工效率低。经多次钛合金车削加工试验、优选了刀具材料,确定了刀具几何参数,依据刀具磨损情况,提供了较为合理的切削数据。解决了钛合金薄壁件加工变形问题。
|
| 关 键 词： | 钛合金 车削 切削速度 |
| 文章编号： | 1001-3997(2006)01-0140-02 |
| 收稿时间： | 2005-04-29 |
| 修稿时间： | 2005-04-29 |
Study on the Turning of thin parts of Titanium alloy |
| |
| ZHANG Gui-mu,YANG YU-hai,ZHAO Shu-guo,GUO Jian-ye. Study on the Turning of thin parts of Titanium alloy[J]. Machinery Design & Manufacture, 2006, 0(1): 140-141 |
| |
| Authors: | ZHANG Gui-mu YANG YU-hai ZHAO Shu-guo GUO Jian-ye |
| |
| Affiliation: | Shenyang Aeronautical Institute of Engineering, Shenyang 110034, China |
| |
| Abstract: | In the traditional titanium alloy process turning efficiency is lower,this because both cutting speed and tool life are lower and process quality controlled is very difficult.The paper describes experiment on turning titanium alloy.The cutting tool material and the geometrical parameters of the cutting tool are selected for turning titanium alloy.The wear of cutting tool being studied.Reasonable cutting parameters are determined by experiment.A method of reducing deformationg is put forward. |
| |
| Keywords: | Titanium alloy Tutning Cutting speed |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
