| Abstract: | Design and operation of a circulating fluidized bed requires the knowledge of fluid mechanics. According to heat and mass transfer as well as chemical reactions, the effect of the set superficial gas velocity on the axial pressure profile is of particular interest. The axial pressure profile was measured for a variety of solids, as a function of the superficial gas velocity, in a cylindrical circulating fluidized bed with an inner diameter of 0.19 m and an overall height of 11.5 m. Depending on the solids content and superficial gas velocity, two or one sections can be observed in the plant where the pressure gradient is constant. A pressure profile with one pressure gradient exists only at high gas velocities, so long as the acceleration pressure drop immediately above the gas distributor is negligible. Comparison of measured pressure drops in circulating fluidized beds with those measured in vertical pneumatic conveying led to a state diagram for vertical gas-solid flows. The operation behaviour of different types of circulating fluidized bed plants can be explained with the aid of this diagram. |
